Non-Lubricated Plug valves (RO/SWRO)
Manufactured under licenced from ARFLU, Spain
The most common applications are: Insulation (On /Off), CIP (on-site cleaning) and Control valves. For each application, SMI can supply different shutter designs and they all fit into the same valve body, allowing you to switch from one service application to another simply by changing the plug.
Why SMI desalination valves are the most efficient and economical on the marketThe revolutionary Sleeve Quick Change system makes them the most popular in the desalination market.
- ZERO LEAKAGE
- TRUNNION MOUNTED
- TOP ENTRY DESIGN
- QUICK CHANGE SYSTEM
- LOW PRESSURE FLANGE
- SMI range of production
- International Design Standards
- DESIGN AND MANUFACTURING
- INSPECTION AND TEST
- FLANGE DIMENSION
- WELDED END
- FACE TO FACE AND END TO END
- DESIGN PARAMETERS
Competitive Advantages
Guided Plug Design supported by 2 bearings, lower and upper, which allows precise Plug position to avoid any deviation from the vertical axis. It provides homogeneous contact between the Plug and the PTFE Sleeve, reducing the friction, the torque and improving the life of the sleeve
Top Entry Design allows integral Maintenance through the Top Bonnet. It is not necessary to remove the Valve from the pipe. Consequently, SWRO Plug Valves are often required with Butt Weld ends to the pipe.
OPTIONAL. No need for Heavy or Bulky Tooling or Technical Assistance from manufacturer to make the sleeve replacement. Easy & Fast, provides Full Autonomy to the site. Certified spares instead of Lining on site means important savings over the years.
OPTIONAL. SMI SWRO Plug Valves can be manufactured with one Low Pressure Flange for direct connection to CIP (plastic/GRP) pipe. LP Flange can be manufactured acc. to customer needs (I.e. PN10, ANSI 150 and others). This solution represents important savings on CIP systems.
SMI, is known for the extensive manufacturing range, we manufacture large number of valves in almost all sizes and materials. If you do not find the valve asayou need in the box attached, please contact our sales representatives and we will study the feasibility of producing in other dimensions.
At SMI we comply with all international design standards.
ASME B 16.34: Valves-Flanged, Threaded, and Welding End..
EN12516: Industrial valves. Shell design strength. Tabulation method for steel valve shells.
API 598: Valve Inspection and Testing.
ASME B 16.5: Pipe Flanges and Flanged Fittings.
ASME B16.25: Buttwelding ends.
STANDARD SMI
ASME B16.10: Face-to-Face and End-to-End Dimensions of Valves.
SMI Plug valves are designed to resist efforts as severe as process water treatment by reverse osmosis process. For this, SMI Engineering Department has developed a valve which design is based on traditional analytical calculation and using international standards ANSI B16.34 and UNE EN 12516.
We use the latest technology (3D Design and Finite Element Analysis) to optimize the design, comparing stresses and strains, calculate allowable flow in the valve and the pressure distribution in the reduction step to avoid turbulence and cavitation.
We have improve service and reliability of our product and we have also reduced to the lowest possible maintenance costs. One example is the Q-Ch System or "Quick Change Sleeve" for a simple, quick and economical replacement of PTFE / Teflon sleeves. (*) See Doc. Download Q-Ch in "TECHNICAL DATA".
SMI Plug valves are made of stainless materials, Duplex and Super Duplex according to requirement of our customers and are usually installed in the High Pressure lines or final process of Reverse Osmosis. We have designed our Plug valves 3 core services within Reverse Osmosis
1. CIP / Cleaning Membranes. (*) See Doc. Download CIP Sketch in "TECHNICAL DATA".
2. Isolation Valves or ON / OFF Service.
3. Regulating Valves for Pump High Pressure Discharge